Announcement

Collapse
No announcement yet.

looking for a suitable pickup / amplification system for a Tacoma Chief C1C guitar

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    Christian
    Member

  • Christian
    replied
    Yair,
    I didn't realize that sound hole was so small. Unfortunately, we don't have anything that would work with that guitar.

    -Christian

    Leave a comment:

  • Yair
    Junior Member

  • Yair
    replied
    Thanks Christian

    I want a mic kind of solution. I once had an EMG piezo and it sounded pretty bad.
    the problem with this Tacoma guitar, is that its is not built with X brace pattern, and it does not have a standard sound-hole.
    So, I cant reach underneath the bridge to install the mic. the sound-hole is a "wing" pattern on the upper left of the guitar and is too small for inserting my hand into the guitar, and the preamp can not be installed on it.

    I need an alternative mic solution.

    Thanks
    Yair

    Leave a comment:

  • Christian
    Member

  • Christian
    replied
    Hi Yair,
    I would recommend checking out the Anthem SL. It is a great choice if you like the sound of the guitar unplugged since so much of the signal is coming from the mic'd soundboard.

    -Christian

    Leave a comment:

  • Yair
    Junior Member

  • looking for a suitable pickup / amplification system for a Tacoma Chief C1C guitar

    Hello,

    I have a great sounding guitar Tacoma Chief C1C ( pre fender)
    DV016_Jpg_Large_512372.010_natural_R.jpg

    and don't have a clue how and which pickup is suitable for this kind of guitar.
    any suggestions?
    Thanks
    Yair
Working...
X