Announcement

Collapse
No announcement yet.

Anthem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Caleb_Elling
    replied
    Hey ttema,
    Have you turned up the Mic Level control since recording the first clip? (the small screwdriver control)

    The sound in the second clip does sound brighter/thinner, but it doesn't sound like the Piezo isn't working. If you roll the Mix wheel all the way over to the bridge side, are you still getting some signal? Or nothing at all?

    Let me know and I will do what I can to help. Also, if you want to email me directly at [email protected], I can answer you more quickly.

    Leave a comment:


  • ttema
    replied
    Hi
    I have same problem with my Mayson guitar and Anthem.
    A couple of month ago the sound was great - mic + low end piezo works good - https://www.youtube.com/watch?v=tVZ9Slgr7GQ
    But now I have problem - no sound from piezo at all, when I turn mix knob toward the bridge the sound just getting more quiet without any piezo at all - https://www.youtube.com/watch?v=yC90mGaUPfo
    When I'm touching piezo there's boomy sound but no string sound...
    So what can I do with my piezo?

    Leave a comment:


  • Caleb_Elling
    replied
    Originally posted by jphenderson91 View Post
    Two weeks ago I bought my third LR Baggs Anthem from Sunrise guitars in Fayetteville AR, and had my guitar tech at Guitar Center install it. Everything works fine except the piezo pickup. When I turn the nob over to the piezo I get no sound at all. The volume switch, tru mic, and battery sensor all are working and plugged into the Anthem control system correctly.

    I
    When you mix over toward the mic, are you getting a full sound? Or is it thin sounding?

    Leave a comment:


  • jphenderson91
    started a topic Anthem

    Anthem

    Two weeks ago I bought my third LR Baggs Anthem from Sunrise guitars in Fayetteville AR, and had my guitar tech at Guitar Center install it. Everything works fine except the piezo pickup. When I turn the nob over to the piezo I get no sound at all. The volume switch, tru mic, and battery sensor all are working and plugged into the Anthem control system correctly.

    I
    Last edited by jphenderson91; 08-15-2019, 03:42 PM.
Working...
X