Announcement

Collapse
No announcement yet.

Para Acoustic DI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Caleb_Elling
    replied
    It varies from person to person. I like to run mine around noon so I have room to turn up or down if I need to.

    Leave a comment:


  • brettm357
    replied
    Thankyou - I still have a lot to learn - In most videos i have seen it seems its recommended to have the LR Baggs above half on the volume - Is this true

    At this stage i am running the Baggs straight into the PA

    Leave a comment:


  • Caleb_Elling
    replied
    Hey brettm357,
    The DI outputs a Line Level signal from both outputs, but I always recommend setting the input on your mixer or speaker to whatever setting sounds the best. Each input is different so the signal from the DI can interact differently with each setting.

    Leave a comment:


  • brettm357
    started a topic Para Acoustic DI

    Para Acoustic DI

    Hello all, Just picked up an older Para Acoustic DI - Is the 1/4 output and the XLR balanced or only the XLR (Just found the answer 1/4 is mono unbalanced and XLR is balanced)
    Also is the output at MIC level or Line level
    I have a DBR10 PA speaker im using that has a MIC/LINE switch trying to work out whats best to use

    Sorry for the newbie questions have tried searching with no luck
    Last edited by brettm357; 01-21-2020, 08:03 PM.
Working...
X